AMPINVT
Onduleur à onde sinusoïdale pure 3000 W DC 12 V avec chargeur secteur
ATTENTION:
- Cet onduleur est capable de charger la batterie lorsque l'alimentation secteur est connectée à l'onduleur.
- 3000 watts est une puissance de sortie continue, la puissance de sortie maximale est de 9000 W
- Cet onduleur peut SEULEMENT fonctionne avec un système de batterie 12V.
- Onduleur NE PEUT PAS prise en charge de la connexion en parallèle.
- Onduleur DOIT avoir une batterie, et la batterie DOIT soyez connecté en premier
Cinq modes de fonctionnement :
- Mode prioritaire CA - L'entrée CA (alimentation secteur/réseau urbain) alimente d'abord la sortie CA (charge de l'appareil) et charge automatiquement la batterie en même temps. L'onduleur arrête automatiquement la charge lorsque la batterie est complètement chargée. Lorsqu'il n'y a pas d'entrée CA, l'onduleur bascule automatiquement sur l'alimentation par batterie.
- Mode priorité batterie - L'alimentation par batterie alimente la sortie CA (appareils/charge). Lorsque la tension de la batterie atteint la limite de tension basse, si l'entrée CA est activée, l'onduleur bascule automatiquement sur l'alimentation d'entrée CA ; si l'entrée CA est désactivée, l'onduleur s'arrête automatiquement. Lorsque la tension de la batterie atteint la limite de tension basse, l'onduleur bascule automatiquement sur l'alimentation par batterie.
- Mode ECO - Similaire au mode prioritaire CA. Lorsque l'entrée CA (alimentation secteur/réseau urbain) est désactivée, l'onduleur passe automatiquement en mode veille lorsque la capacité des appareils est inférieure à 5 % de la capacité de l'onduleur. L'onduleur commute automatiquement entre l'état de marche et l'état de veille afin de détecter si la capacité de sortie CA (appareils/charge) dépasse 5 % de la capacité de l'onduleur. Si la capacité de sortie CA dépasse la limite mentionnée ci-dessus, l'onduleur passe automatiquement de l'état de veille à l'état d'inversion.
- Mode générateur - utilisez un générateur instable pour générer de l'énergie, accédez à l'entrée CA de l'onduleur via le régulateur AVR de l'onduleur, correspondance automatique de la fréquence municipale 50 Hz/60 Hz, régulateur de tension de sortie dans la plage de fonctionnement normale.
- Mode sans surveillance - Mode de priorité CA similaire. Lorsque l'entrée CA (alimentation secteur/réseau urbain) est trop faible, l'onduleur arrête automatiquement la sortie CA et passe en mode VEILLE. Une fois la batterie rechargée jusqu'au point de tension de restauration, l'onduleur redémarre la sortie CA. D'autre part, lorsque l'entrée CA est rétablie, l'onduleur redémarre également automatiquement la sortie CA.
Inverter x1
Power Cable x1
User Manual x1
Communication Wires (optional)
External Display (optional)
Download AMPINVT FT Series Pure Sine Wave inverter Manual
Produits populaires
We recently purchased and installed the 2000W/12VDC unit for backup of a few critical pieces of equipment.
The inverter is fairly heavy, seems well built (from the outside), and has been up and running now for a few weeks. The documentation is pretty basic, and just gives 'screen shots' of the different menu options.
We have tested with cutting the power (breaker) off to the unit and it promptly switches over to the battery backup without issue (LINE POWER PRIORITY SETTING). We like that there is the option of setting the DC Source as the priority, which would be helpful if you are using solar and want to run off the solar as priority. Of course you are going to need to provide the panels, the wiring and the charge controller to the setup to do this.
We did add in a 'battery monitor' to be able to better 'see' how much power we are using and have remaining off the battery as needed. Would highly recommend this setup to others as the built in components do not seem to be providing accurate numbers (we have a desktop computer, printer a 15w led light and IP phone running off the inverter, and it's stating that we only have a 3% load on the inverter - which cannot be right). We wanted some way to validate the usage on our battery in a 'backup' situation.
All-in-all the unit at this price point does what it should, seems to be well built and operates as expected. We're giving it a solid 4 stars, but holding one back for the output wiring issue and battery monitoring inconsistencies.
I installed this in my school bus conversion and am very pleased with its performance so far. I love how I can hook up everything I need on the 12 volt poles (batteries and loads), hook up 120 volt AC loads on the other side, plug in 120 volt AC from grid power, and this inverter charter keeps track of everything and automatically knows what to do in order to keep the loads going and the battery voltage in acceptable ranges. I even set up a 4-way isolater switch on the 12 volt side to let me select between the bus starter batteries, the lithium phosphate "house batteries", both battery banks at once, or neither bank. When plugged into grid power, I can decide which battery bank I want the inverter to charge. Also, because the bus alternator is wired to the starter batteries, I can set the switch to "1+2" and have the bus engine charging all batteries as well as supplying power to the inverter, which can be used to power the 120 volt AC gear I have in the bus.
This inverter has been able to power a 12,000 BTU mini-split air conditioner, a 13 cubit foot refrigerator, and various handheld power tools. It only beeps at me if I am running more than two of these things at once.
Overall, I love having the charger integrated. I love how this unit does so much and has a lot of modes and options for being in different situations on the road or camped out. Five stars all day long.
A great unit, exactly what I needed for my motorhome. I am a newbie when it comes to dolar systems do it would have been a hugh hrlp if thr manual was more informative. I also purchased the remote panel. Installation was a snap.
I have purchased and have owned 5 Inverters prior to this purchase and it has been surprisingly the best one so far.
Decided to upgrade to an Inveter that has UPS capabilities for our Mobile Food Truck as we have had power being loss when connected to shore during storms at our Storage facility where we park our trucks.
The ATS feature works as expected, load handling is great.
It appears to be well made and quality steel casing. It does a better job of handling power consumption with battery bank which provides longer run time.
I need another unit to replace another Inverter, but this unit and the 24V version is no longer available on Amazon.
Hoping they will bring back.
I bought this inverter for my camper to run the ac power when not connected to shore power, other than shipping damage when I received the product it has performed excellent.
